Hard Drive Cloner | 2.5"/3.5" HDD/SSD | USB 3.2 Gen 1 (5 Gbps) / eSATA | SATAThe SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system -- or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port.Versatile FeaturesThe SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information -- ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB.Fast PerformanceWith support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0). See our UASP testing results below for further details.Hassle-free OperationWith push button operation and plug-and play installation, the duplicator dock has been specially designed for hassle-free operation. The SDOCK2U33RE lets you quickly dock your hard drives or start duplicating hard drives with the push of a button. Plus, the built-in LED progress bar saves you time by letting you easily monitor the entire duplication process, so you'll know exactly when it's time to start your next operation.For added compatibility with different drive types in duplication and docking applications, the SDOCK2U33RE supports the use of various drive adapters. The below list of StarTech.com adapters have been specifically tested, to ensure compatibility with this drive duplicator:2.5/3.5in IDE drives - SAT2IDEADPmSATA drives - SAT2MSAT25M.2 (NGFF) drives - SAT32M225SDOCK2U33RE is backed by a StarTech.com 2-year warranty and free lifetime technical support.Improved Performance with UASPUASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.At the same peak in testing UASP also shows an 80% reduction in required processor resources.Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.The StarTech.com Advantage
Design
Certification CE, FCC
LED indicators Y
Product colour Black
Product type HDD/SSD duplicator
Supported HDD sizes 2.5,3.5"
Features
Chipset JMicron - JMS562
Hard drive
Supported HDD interfaces Serial ATA, Serial ATA II, Serial ATA III
Logistics data
Master (outer) case height 463 mm
Master (outer) case length 617 mm
Master (outer) case width 209 mm
Products per master (outer) case 10 pc(s)
Operational conditions
Operating relative humidity (H-H) 20 - 80%
Operating temperature (T-T) 5 - 35 °C
Storage temperature (T-T) -20 - 50 °C
Other features
Dimensions (WxDxH) 132 x 147 x 70 mm
Packaging content
Cables included USB, eSATA
Included power plug types ANZ, EU, NA, UK
Manual Y
Performance
Linux operating systems supported Y
USB connector type USB Type-B
Windows operating systems supported Y
Ports & interfaces
Interface USB 3.2 Gen 1 (3.1 Gen 1)/eSATA
Power
AC input voltage 100 - 240 V
Input current 1.3 A
Output current 3 A
Output voltage 12 V
Sustainability
Sustainability certificates RoHS
System requirements
Mac operating systems supported Y
Server operating systems supported Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 x64
Technical details
Duplicator operating modes Copy
Maximum supported storage capacity 8 TB
Number of simultaneous copies 1 copies
Transfer rate 6000 MB/s
Weight & dimensions
Package height 213 mm
Package length 11.8 cm
Package weight 1 kg
Package width 190 mm
Weight 528 g

Write a review

Please login or register to review

StarTech.com Dual Bay Hard Drive Duplicator, Standalone USB 3.0 (5 Gbps) / eSATA to 2.5/3.5" SATA III HDD/SSD Cloner/Copier, Hard Drive Docking Station, Hard Disk Cloner

  • Brand: StarTech.com
  • Product Code: SDOCK2U33RE
  • Availability: In Stock
  • $96.34


Specs: Icecat
The information published by Icecat is based on sources that can be considered reliable, but Icecat and its suppliers provide this information "AS IS" and do not guarantee correctness or completeness. The published information is only indicative and can be changed at any time without notification.